1 / 2
Simagic P2000 Pedals Base Shaker Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for the cheap 25W Base Shakers
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for cheap 25W 50mm little base shakers to fit the P2000 Simagic Pedals.
You will need:
- 1 x M5 x 12mm socket head screw (to screw into the base shaker)
- 2 x M5 x 35mm socket or button head screws and nuts (to clamp the adapter to the pedals
I have tested on my rig and the shaker clears the brake fluid reservoir when braking, but I guess it all depends on the travel you have in the pedals.
Not sure if it's just coincidence, but I had one printed out of PETG and one in PLA. The PLA one made a very different sound, more mechanical, the PETG was more dampened and deeper. So if that happens to you, just print them in PETG.