Drill hole Dust Sucker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vacuum cleaner attachment to suck dust out of tight places.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
While drilling some holes in concrete recently, I needed to extract the resulting dust from the holes and found that my vacuum cleaner was doing a poor job of it. 3D printing to the rescue! I designed and printed this attachment out and stuck it down the holes; et voila, no more concrete dust in the holes and my expansion bolts could be hammered in.
Inner diameter of the attachment is ~31.xmm, to slip over a 31mm vacuum cleaner end. No idea if this is standard or not, this is the diameter mine has.
The tip is ~9mm diameter and ~70mm long, slips comfortably into 10mm holes and bigger.
Best printed with a less rigid material to avoid cracking, I used PETG.