Drill hole Dust Sucker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vacuum cleaner attachment to suck dust out of tight places.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
While drilling some holes in concrete recently, I needed to extract the resulting dust from the holes and found that my vacuum cleaner was doing a poor job of it. 3D printing to the rescue! I designed and printed this attachment out and stuck it down the holes; et voila, no more concrete dust in the holes and my expansion bolts could be hammered in.
Inner diameter of the attachment is ~31.xmm, to slip over a 31mm vacuum cleaner end. No idea if this is standard or not, this is the diameter mine has.
The tip is ~9mm diameter and ~70mm long, slips comfortably into 10mm holes and bigger.
Best printed with a less rigid material to avoid cracking, I used PETG.