Housing for 100 Watt Powerbank (Upgrade: Magnetic Cover)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY powerbank with an output of up to 100 watts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Inspired by GreatScott!'s 100 Watt powerbank build, this is an alternative housing for the same components in a different arrangement (see pictures).
Additional material needed: 4 x M4 50 mm cylinder head screws; threaded inserts.
Optional (files *_mag*): There is an optional cover that can accommodate a USB-C cable and adheres to the housing with magnets (6x3 mm). The print of the underside of the housing must be paused in order to place the magnets in the housing, as there are no screws to which the magnets can adhere.
Self-adhesive rubber feet can optionally be attached to the underside.
No supports needed.