1 / 9
Housing for 100 Watt Powerbank (Upgrade: Magnetic Cover) — image 1
1 / 9

Housing for 100 Watt Powerbank (Upgrade: Magnetic Cover)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIY powerbank with an output of up to 100 watts.

Rating
0 / 5
Likes
0
Downloads
17
Makes
0
Views
176
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

Inspired by GreatScott!'s 100 Watt powerbank build, this is an alternative housing for the same components in a different arrangement (see pictures).

Additional material needed: 4 x M4 50 mm cylinder head screws; threaded inserts. 

Optional (files *_mag*): There is an optional cover that can accommodate a USB-C cable and adheres to the housing with magnets (6x3 mm). The print of the underside of the housing must be paused in order to place the magnets in the housing, as there are no screws to which the magnets can adhere.

Self-adhesive rubber feet can optionally be attached to the underside. 

No supports needed.

Tags