Worm gear mechanism test cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smal mechanism with a worm gear that was insteded as a locking pin, but ended up using for test printing instead
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I wanted to make a locking pin mechanism, but it was hard to see what went wrong inside, so I ended up making this test cube, then as I refined the test cube I ended up using it for test printing, since it was fast to print and I could easily see stringing, gaps etc. I ended up getting a good print, but in the end it was too unreliable for my cheap printer to use this mechanism in the part i intended, the tolerance is too tight for my cheap printer and I would only make a working small cube every 5th print or so.
but i scaled one up to 200% to test on my 8mm nozzle and that worked like a charm, no issues on any print.
here is a video of the 200% scale on a 0.8 nozzle
hope this test cube can be a fun little thing anyone would like to try.