Floortom Microphone Holder - TD17 and Acoustic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to create a holder to have quick access to a microphone while im drumming to make shoutouts.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Microphone holder with floortom adapter
I've modified the original design by adding an adapter for my floortom. The stand's measurement was 9.8 mm, so I created a hole with a 10.2 mm diameter. You may need to adjust this size for your specific floortom.
The fit is secure and not loose for my setup. I reduced the size of the original design to the minimum necessary to improve print speed and eliminate unnecessary material. It remains stable even at 80% cut off original. I have attached the original file along with my added adapter.
- neutral-floortom-micstand-10-2mm.stl - Final adapter with 80% cut of the original.
- lifebnd-floortom-micstand-10-2mm.stl - The same file with band branding.
- full-adapter-microphone-10-2mm.stl - Full adapter with the added floortom feature.
- drum_mic_holder_honeycomp_sticktray-td17.stl - For TD17 eDrum Kit
- drum_mic_holder_honeycomp_sticktray-accustic.stl - For Accustic with sticktray
Disclaimer for the pictures. First picture on the drum show an earlier version. But the microphone was to far in for me so i've created version 2 where the mic sticks out a little more and is easier to grab. Didnt had a picture of v2 on drums so you get the idea.
You see the version 1 along with the version 2 on picture 2.
Picture 3 shows version 2 only. You see the difference when the mic sticks out more.
Uploaded here is only version 2.