Reworked Vertical Display for (Un)Original Prusa Drybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
changed around the construction of the vertical display a bit to make it stronger.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 187
- Wydruki
- 4
- Wyświetlenia
- 801
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2024-08-16:
loosened the fit between the tray and the stand in the 3 part version
Update: 2024-08-10:
I soldered this up and was not thrilled with how tight the soldering job had to be. I reworked the model to be 3 parts, in order to simplify soldering the buttons. I will add build pictures later, but will post the model now.
Original Summary:
see pics. Assembly pretty easy. will need updated screws to reach through bracket x through both display pieces. M3x12mm work well, in my experience.
my print settings are in the .3mf (mmu3 profile). I used [email protected] layer, supports on build plate only. printed in PETG.
let me know if you want any variations. .step file attached.