Reworked Vertical Display for (Un)Original Prusa Drybox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
changed around the construction of the vertical display a bit to make it stronger.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 188
- Makes
- 4
- Views
- 802
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2024-08-16:
loosened the fit between the tray and the stand in the 3 part version
Update: 2024-08-10:
I soldered this up and was not thrilled with how tight the soldering job had to be. I reworked the model to be 3 parts, in order to simplify soldering the buttons. I will add build pictures later, but will post the model now.
Original Summary:
see pics. Assembly pretty easy. will need updated screws to reach through bracket x through both display pieces. M3x12mm work well, in my experience.
my print settings are in the .3mf (mmu3 profile). I used [email protected] layer, supports on build plate only. printed in PETG.
let me know if you want any variations. .step file attached.