Trash bags roll holder (True vase mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trash bag roll holder. Mounted by double-sided tape or screw. Can be mounted sideways or vertically.
- Ocena
- 4,5 / 5
- Polubienia
- 313
- Pobrania
- 862
- Wydruki
- 3
- Wyświetlenia
- 3343
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Trash/garbage bag holder (roll keeper)
Model is in lightweight, easy-to-print, fast Vase mode.
You can mount it anywhere in any position using double-sided scotch-tape as well as screws (holes should be made).
Available sizes:
Length: 12cm, 16cm, Diam: 5.5cm, 6cm respectively
Nozzles: 0.4mm, 0.8mm
Different models for different nozzles! Select model for your nozzle!
0.8mm nozzle model\print is really stiff. I've set layer wall width to 2mm.
0.4mm nozzle model\print is flexible, but still does it's job. Wall width is 0.75mm.
Please, check my designs, share your make. I'd love to see your make.
Happy printing!
See also NEW VERSION Trash bag holder:
