baofeng pouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed some simple belt pouches for Baofeng radios. These fit radios such as the UV-B5, BF-888S, etc. The "button"…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some simple belt pouches for Baofeng radios. These fit radios such as the UV-B5, BF-888S, etc. The "button" file is for a button that can be CA glued to the pouch front if you want to add a loop of elastic cord onto the belt loop for retention purposes. I added such a loop to some of mine using CA glue & shrink tube to seal the ends together. Retention is decent even without the cord. The "b" versions have a small hole for anchoring an elastic loop.
These should be printed in a flexible filament, like TPU, for best results. No supports are required for printing.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/6vqJzSzFBrT
Category: 3D Printing