baofeng pouch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed some simple belt pouches for Baofeng radios. These fit radios such as the UV-B5, BF-888S, etc. The "button"…
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 120
- Makes
- 0
- Views
- 1,482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some simple belt pouches for Baofeng radios. These fit radios such as the UV-B5, BF-888S, etc. The "button" file is for a button that can be CA glued to the pouch front if you want to add a loop of elastic cord onto the belt loop for retention purposes. I added such a loop to some of mine using CA glue & shrink tube to seal the ends together. Retention is decent even without the cord. The "b" versions have a small hole for anchoring an elastic loop.
These should be printed in a flexible filament, like TPU, for best results. No supports are required for printing.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/6vqJzSzFBrT
Category: 3D Printing