ModulR middle plate mount for Cartographer/Beacon Sprite Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ModulR by Zuff remix of middle plate to accommodate eddy current sensor either Cartographer or Beacon.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 902
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
First of all I recommend buying original model of ModulR from Zuff on cults.3d
This is a great duct with sufficient airflow to print at high speeds using one 5015 fan.
I have modded with author’s consent middle plate that is designed for longer hotends like CHCB-OT to accommodate eddy current sensing probe.
I am using Cartographer but Beacon will also fit. Flat pack is required but usb mounting needs to be resoldered to make it more compact.
After screwing on probe it will have the same height from bed as duct, just position your duct 2mm above nozzle.
Dimensions were calculated to respect 20mm no metal zone above probe so take certain care to measure that mounting duct on hotend of Your choosing.
There are no heat inserts nesessary as screws tap into print (use original screws that come with probe).