Ableton Push 2: Tabletop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic attachment for portability
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 708
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated model: slightly wider for stability and better recess for the magnetic sheet.
This stand will lift an Ableton Push 2 controller to an angle of 35 degrees which will allow much better visibility of the screen and improve access to buttons and knobs when on a desk. The stl model is for the right-hand side so just use your slicer to print a mirror version for the left side.
You will need (cut from A4 sheet):
2@ 190 x 31 x 0.85mm ferrous sheet (this thickness will sit flush with the stock rubber feet on the Push 2)
https://www.amazon.co.uk/gp/product/B07TVD53KN
2@ 286 x 31 x 1.5mm magnetic sheet 1.5mm thick (will fit perfectly in the recess on the stand)
https://www.amazon.co.uk/gp/product/B0CDQJPP75
I also used some 35x35mm squares of grip tape on the bases to stop it sliding around on my desk.