Filament Shelf ("T-Bone-Steak")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Shelf with special honeycomb infill
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I've designed this filamentshelf to test different print-settings in one part. There is the Structure of the print, which has 100% concentric infill to take the loads and then there is the Infill itself, which uses 10% honeycomb infill and one wall.
I achived this by using Part Settings in Bambu Studio (or PrusaSlicer).
In the files, you find two .3mf files. One for Bambu Studio and one for Prusa Slicer. Adapt them to your liking.
You will need rods with a diameter of 15mm and M4 Type of screws with a tapered head. If you want to adapt the design, a link to the Onshape document is provided, as well as the step files.
After assembling the shelf, it appears, that the rods are not as stiff as needed. I suggest to use something stiffer, or increase the diameter in the design.