GU10 Spotlight (various versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GU10 spotlight in various versions.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 156
- Wydruki
- 2
- Wyświetlenia
- 826
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the single-LED versions of the spotlight. If you are looking for tri-LED versions, you can find them here.
I specifically designed this light fixture for the Phillips Hue GU10 LED bulb. However, it should also be suitable for other GU10 LED bulbs, as long as their maximum diameter is no greater than 53 mm.
The light fixture consists of two parts: the spot and the mount. Both the spot and the mount come in various versions (see pictures), all of which are compatible with each other. This allows you to customize the assembly to suit your specific needs.
Here's what you need for that:
- 1 x GU10 socket
- 1 x Philips Hue GU10 Bulb
- a few drops of super glue
The connection to the power cable is easiest with two Wago 221-413 connectors.
Printing information
All STL files are correctly aligned.
Layer height: 0.20
Perimeter: 2
Infill: 5%
Support: none
Glue the GU10 socket into the designated recess of the mount. Insert the bulb and finally screw the spot onto the mount.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.