1 / 2
Angle for picture rail compatible with Mosslanda
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assembly aid for upside down installation of picture rails
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I use the picture rail as a floating shelf next to the couch. You can't see the underside and I made an angle so that the picture bar can be mounted more stably on the wall.
The shelf is approximately 10 mm thick. In addition, the screws can be screwed into the plastic structure by approximately 8 mm. The screw should therefore not be longer than 15mm so that it does not protrude at the other end.
This product is an independent design and is not affiliated with any company.
I printed with PETG, an 25% infill.