1 / 4
Generic 1/28 RC race truck body V1.1 for WLTOYS K989 — zdjęcie 1
1 / 4

Generic 1/28 RC race truck body V1.1 for WLTOYS K989

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

V1.1 of RC race truck body for WLTOYS K989

Ocena
0 / 5
Polubienia
17
Pobrania
59
Wydruki
0
Wyświetlenia
487
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This is V1.1 of the generic 1/28 scale race truck body designed for the WL-toys K989 chassis.

This is an updated version of V1.0 https://www.printables.com/model/159977-generic-128-rc-race-truck-body

The cabin is designed to be printed on its roof with minimal supports needed.

The side skirts and cabin are glued together. see photo for where to put the glue

To attach the front mount you need to remove the original front bumper. (don't lose the screws, you need those again)

There are two versions of the front mount one puts the cabin 1.5mm higher in case the front wheels rub to much against cabin.

In the rear bumper are openings so you can put the screws in to hold the original body mount in place

 

 

Change log:

6 August 2024 V1.1:
  • Redesigned front mounting system
  • body is 6mm wider
  • Increased front fender diameter by 1mm
  • rounded some areas at the back of the skirts/fenders
  • Closed extra holes at the back of fender mounts
  • Added rear bumper
  • Added some details to the back of the cabin
  • Made pillars next to front windshield thicker
  • Made cabin walls slightly thinner to reduce weight

Tagi