Shoulder holster for Standard Horizon HX870 marine radio
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shoulder holster to attach to your PFD. Easy to unclip the radio, make adjustments, then re-clip it into the holster.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
Print the parts as shown. The body is printed at a 45 degree angle. The gcode and the picture use a 10mm support enforcer, but a brim is sometimes all you need. I used ABS as the holster sees a lot of UV.
Print the other parts as shown. The two-piece clip screws on the back of the HX870 in place of their belt clip. The two pieces just slide together. You may have to do a little filing to make it work. :-(.
Use a piece of 1.75mm filament as a rivet to retain the slider. The two isometric views show the slider in the open and closed position.
You also need two pieces of Velcro One-wrap ¾"x5" (19mm x 125mm).
I've include .stp (.step) files if you want to modify the project.