Shoulder holster for Standard Horizon HX870 marine radio
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shoulder holster to attach to your PFD. Easy to unclip the radio, make adjustments, then re-clip it into the holster.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- GNU General Public License v2.0
Print the parts as shown. The body is printed at a 45 degree angle. The gcode and the picture use a 10mm support enforcer, but a brim is sometimes all you need. I used ABS as the holster sees a lot of UV.
Print the other parts as shown. The two-piece clip screws on the back of the HX870 in place of their belt clip. The two pieces just slide together. You may have to do a little filing to make it work. :-(.
Use a piece of 1.75mm filament as a rivet to retain the slider. The two isometric views show the slider in the open and closed position.
You also need two pieces of Velcro One-wrap ¾"x5" (19mm x 125mm).
I've include .stp (.step) files if you want to modify the project.