Higher resolution Trek Badge with magnet hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remake of my other badge here http://www.thingiverse.com/thing:34807 This one is higher resolution and has a…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 240
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remake of my other badge here http://www.thingiverse.com/thing:34807
This one is higher resolution and has a hole or round inset in the back for a 3/8" magnet. This allows it to be a fridge magnet or use another magnet under a shirt to attach to clothes.
Instructions
For best results use a .35mm nozzle or smaller. I got best results with a .15mm layer height and printed very slow 10mm-20mm second.
I did fill a few pinholes in the silver part with ABS/acetone solution and then lightly sanded it before painting. Glue a magnet in the back you are ready for service.
Category: Accessories