Hex Key EZ Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hex Key Handles
- Ocena
- 4,955 / 5
- Polubienia
- 1637
- Pobrania
- 3721
- Wydruki
- 78
- Wyświetlenia
- 17 857
- Oceny
- 66
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a stylish and easy-to-handle Hex key handle, available in five sizes: 1.5mm, 2mm, 2.5mm, 3mm, and 4mm. Print with a 0.4mm nozzle on a properly calibrated printer, using a brim if necessary.
This design is intended for use with standard hex keys that have a 90-degree bend angle and cannot be used with stubby hex keys that have a 95-degree bend angle.
It is a reworked version of my previous design, with the following changes:
- Size indications in millimeters, which were highly requested, have been added to both the cap and the handle.
- By securing the Hex key on the handle side, the handle cap no longer loosens when you loosen screws.
- The handle size has been made the same, regardless of the Hex key size.
- Even more stylish than before!
How to EZ color change on PrusaSlicer:
Update:
[19/08/2024]
I've also added handles without size markings.
[10/08/2024]
I loosened the thread tolerance by 0.1mm.