1 / 5
Hex Key EZ Handles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hex Key Handles
- Rating
- 4.955 / 5
- Likes
- 1,637
- Downloads
- 3,721
- Makes
- 78
- Views
- 17,857
- Reviews
- 66
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a stylish and easy-to-handle Hex key handle, available in five sizes: 1.5mm, 2mm, 2.5mm, 3mm, and 4mm. Print with a 0.4mm nozzle on a properly calibrated printer, using a brim if necessary.
This design is intended for use with standard hex keys that have a 90-degree bend angle and cannot be used with stubby hex keys that have a 95-degree bend angle.
It is a reworked version of my previous design, with the following changes:
- Size indications in millimeters, which were highly requested, have been added to both the cap and the handle.
- By securing the Hex key on the handle side, the handle cap no longer loosens when you loosen screws.
- The handle size has been made the same, regardless of the Hex key size.
- Even more stylish than before!
How to EZ color change on PrusaSlicer:
Update:
[19/08/2024]
I've also added handles without size markings.
[10/08/2024]
I loosened the thread tolerance by 0.1mm.