1 / 2
Topre Realforce 87U TPU gasket — zdjęcie 1
1 / 2

Topre Realforce 87U TPU gasket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A gasket that goes between the steel plate and keycaps to reduce the sound of plastic hitting metal when typing.

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

If you are using silencing rings mod on your Realforce 87U, the whole action is moved down a little. At about 0.5mm thickness of the rings, some keys (especially the longer ones, like enter or shift) may begin to touch the plate when fully pressed, which sounds bad. One method to work around this is to use keycap o-rings to prevent the clacky bottom-out, but I have found that moving keycaps up this way may prevent them from latching in their positions in the switches, resulting in rocking side to side that may be as bad as to lead to keycaps randomly popping out (happened to me too may times).

As a remedy to this, I propose a different solution - a gasket that provides soft landing for the keycaps. If you don't want to get it lasered from silicone, you can print it with TPU.

I used Fiberlogy 40D TPU on a rough PEI sheet without bed heating. The gasket needs to be removed gently to prevent warping, after a pouring a generous amount of IPA on it.

Tagi