1 / 4
Brother VC500W Stand and Tub
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brother VC500W Stand and Tub
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)Powiązane
This is a Brother VC500W Stand and Tub.
There is a longer and a smaller versiion of the tub.
You need:
2 3x10mm magnets for the tub
2 3x12mm magnets for the stand
For the bottom you need TPU Feet.
They need to be glued in the holes on the parts.
Print Option:
For Tub and Stand:
Bambu Lab PLA
15% Infill
For TPU Feet:
TPU
100% Infill
Supports are needed on the bottom where the door seal stripes are glued on
If you have any questions, feel free to ask.