1 / 4
Brother VC500W Stand and Tub
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brother VC500W Stand and Tub
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Brother VC500W Stand and Tub.
There is a longer and a smaller versiion of the tub.
You need:
2 3x10mm magnets for the tub
2 3x12mm magnets for the stand
For the bottom you need TPU Feet.
They need to be glued in the holes on the parts.
Print Option:
For Tub and Stand:
Bambu Lab PLA
15% Infill
For TPU Feet:
TPU
100% Infill
Supports are needed on the bottom where the door seal stripes are glued on
If you have any questions, feel free to ask.