10,428 models
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…
Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…
Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…
Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…
I used PLA, 0,4mm nozzle, 10% infill and 0,2mm layer. NO SUPPORTS needed. I scaled both of the parts down to 40-50%.
Description: This bit tool is so compact that it can be used in the tightest corners. There’s never too little space for working with it. It is designed for a hex bit with a width of 6.3 mm (approximately 0.24 inches). According to…
Holds your PTFE tubes from the MMU2/MMU3 nicely parallel - which helps to reduce friction. The part does not actually clamp the hose, but the friction should be enough to hold it in place. The model allows you to choose either an M3…
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG
This is my rework of Prusa MMU2 PTFE Tubes Separator by fucosk https://www.thingiverse.com/thing:3166394 I just rounded off the corners a bit
Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…
This is an improved guide tube for the eSun eBox filament dryer. The original one is made with rubber and can not hold the guide TPFE tube firmly. I break one, thus I create a enhanced version of it.
tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
$100 for velocity stacks. No thanks. These will fit all Challenger models from the SXT to the Demon as long as they don't have the light tubes installed. On some models, you'll need to reach in behind the headlight and push in the 3 clips…
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…
A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…
You have upgraded your Prusa i3 MK3s+ with the MMU2s upgrade and selected drying solution with varying degrees of PTFE tubing guides for filament. Now you need a hardware free efficient way to organize the 5 channels of filament in your…
UPDATE: several ppl said the labels were too deep and left holes. this version corrects that. All .STL files are at 100% size (~41 mm wide) My take on a stackable daily (up to 3 times/ day) pill box system. sections are easily unscrewed…
While designing my other dice tube, I wanted to make an even simpler and smaller one for some other dice, so I came up with this design. It's a simple tube for 6 normal dice; inner diameter is 21mm. Takes only 6.5g filament, and about…
The Prusa Mini can be upgraded with the Prusa Mini Base and Bondtech IFS sensor. In that case the filament sensor holder (Prusa Mini Base) can be replaced using this bowden tube holder. It should guide the bowden tube to the filament…
This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this…
Printed in PLA from Olympfila Athena PLA+ Easy to print
A handy thermos cozy thing for Ninja Creami containers. Dual wall design with a large air gap in between for proper insulation. Keeps ice cream tubs cooler and ice-creams unmelted significantly longer Prevents water condensation and drips…
The goal was to make a test tube rack that could print on one print bed (MK3S+) to use for our lab. The commercially available options are too expensive for what they are. This is easy to assemble with just a pair of pliers, pressing the…
This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…
Print details: Material: PLA Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: no Infill: 15% [English] The PTFE tube inserted in the hotend of the PRUSA i3 MK2.5S/MK3S/MK3S+ must be bevel-cut at both ends at 60 degrees. It is…
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
This is a simple wall mount PTFE tube holder designed to be mounted below a spool feeding into the MMU2S unit.
Print with brim. I used PETG and 15 percent infill 2 perimeters. Worked fine.
Yet another PTFE Tube Cap with Filament Catch and Retainer A simple cap that seals the end of 4-mm PTFE tubes from humidity, and at the same time prevents the filament from sliding back into the tube. Ideal for use with a filament drybox!…
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
Printing costs per rack ~1.60 Euro.
This tool is used to remove and install the spark plug tube seals on a ford 3.5l engine. The ford part number is 303-1247. I guessed the dimensions by measuring my engine and looking at pictures of the real part. Print with a lot of…
Presentation of the models More belly than muscle: This model is designed for those who love 3D printing (who doesn’t? 😉), like to work out once in a while, but prefer to spend their free time in the kitchen looking for a delicious snack.…
I had a broken faucet retainer that kept leaking. So of course 3d printing to the rescue! it saved me $50 in the end, considering you cannot buy just the piece that was cracked. You'd have to buy the entire handle ($50) or replace the…
Tube holder for two tubes; Falcon 15ml, Falcon 50 ml
This is juggling tube toy perfect for a last minute Christmas Gift. It is my interpretation of a popular kids toy, but made printable. In the video I am using a cat toy as the ball but practice golf balls also work well. Any ball around…
As you can see, chicks can also swim. Add a little less ballast than I did so that it can float more easily if you like. I used 7g (2 Allen screws M5x16) and printed with 0.2mm layer height without support. Art design by Hannah. Happy…
This is a further model of a tube holder suitable for Covid-19 self-test tubes It should make life easier for anyone struggling to hold the different components of the self-test kit in his or her hands simultaneously.
This is a very simple print that will help tremendously with the organization of your PTFE tubes coming off your MMU2. No need for supports prints amazing without.
Pack up a print and ship it to a friend! Upcycle your old Prusament cardboard spool core by turning it into a mailing tube with these printable caps. Each printed cap uses less than 13g of filament and takes about 20 minutes to print with…
Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…
Support pour nettoyage ou le séchage d'un tube CPAP. Besoin deux 2 ou 3 vis 4MM x 30MM
Tube for attaching to a swimming pool skimmer plate. Print instructions PETG - I was able to remove bridge supports from the inside by pliers without bigger problems, however some smaller parts of the support basement will probably remain…
I created this Sink / Tub Strainer for 40 mm (1.5 inch) drains to prevent large objects (like screws) from going down the drain in my utility room sink. Before long, I realized that it was also the perfect addition to my bathroom tub.…
Eppendorf tube holder 9x1,5mL print in place. There are some small details next to the feet that make the print look better. Can be easily removed after printing , as if they were supports.
I hate when my samples are getting lost in the sea of ice in my ice box. I got inspired by https://www.thingiverse.com/thing:4732058 and made my own version dedicated to 0,5 ml vials. Design of the plate with numbers and letters is…
I made this since my the bottom part of my IKEA tertial lamp was bent… I designed this in Fusion 360, made to slide into the bottom of the steel tube part of the lamp. Its drawn with a diameter of ø9.65 mm to slide in the pipe that was…
škrtítko na vzduchovací hadičku do akvária ocení každý akvarista
A holder to keep opened 0.5 g and 3 g super glue tubes in a standing position to prevent then from clogging. Requires one of the Multiboard Snaps to click into. Thanks to Jonathan ( KeepMaking ) for creating multiboard
This simple insert turns your Axygen pipette tip boxes in to sample boxes using a handy insert for 0.6mL centrifuge tubes. Or you can just use as a stand alone rack. We use these to more securely store our samples in the fridge and…
This is a simple jig to drill through the plexiglass on the back of the Original Prusa Enclosure and pop out the 5 PTFE tubes of the MMU3. It should work for any PTFE tube with 4mm OD. It must be screwed to the outside of the enclosure…
Ideally print in PC but works with PETG. Use at own risk.
this is a remix to make the plug fit a 32mm steerer tube
An upgraded version of the original 25-slot NMR tube holder , this new design accommodates 50 tubes and includes an anti-slip layer for added stability during use. Perfect for synthetic chemists and lab work! 🛠 Features: Holds 50 standard…
A compact, custom-designed toothpaste tube squeezer in a bunny shape, made especially for Easter. It helps squeeze toothpaste and similar tubes more evenly and makes it easier to use every last bit. Practical, decorative, and a fun 3D…
As seen on Instagram - hold two tubeless valve bodies or valve extenders together so they don't get separated in storage. Three versions for various printers: Prusa MK3S sliced at 0.300mm layer height with PrusaSlicer - 1.13mm wall…
ADDENDUM : When I originally made these in Aug. 2022 I had some concerns that PETG might not hold up well in hot chlorinated water. As I write this in March 2024 I can report that that the prints still look as good as when I originally…
A simple ukulele capo designed to snugly fit inside a section of used bicycle tube, held in place by a rubber band. I've recycled a short section of the rubber inner tube from a road bike tire to use with this capo. It has two grooves to…
Pièce pour extension de l'espace du laser pour la K40
Original tube that come with eSUN eBOX is made from some sticky material (not PTFE) and filament get stuck in it from time to time making printing from the dryer almost impossible. So I made my own version using standard parts. I use…
Two different PTFE-mounts with 3mm-holes. I didn't like the print-orientation the original model forces you to use, so I remixed it.
If you lose the original stylus and the backup just print yourself a new one. Small but comfortable. ℹ : fits model - WT16312B holder sleeve and stand hole (see images below). Still draws on other models. Tip: print vertically with…
I use paper tubes to store long crafting items such as wire, wood and threaded rods, etc. Tubes are also good for protecting shipments. They come in many sizes and are really strong and durable. This model is primarily for a tube with a…
Since my bullitt cargo bike didn't have a standard way to mount a sp connect micro stem mount for my phone, i had to design my own and it works perfect. I used a M6*40 stainless steel torx screw and a M6 lock nut to mount it. I printed…
If you're a CPAP user, you've probably experienced this: It's been a long day and you're looking forward to a restful night's sleep. Climbing into bed, you fish around for the end of your hose to plug into your mask. Your hand finds the…
Simple caps for bowden tubes on a Polymaker Polybox to add extra moisture protection to your filament without having to remove the tube from the tricky rubber seal. It should decrease the humidity in the box by at least 3%. One is an end…
30mm Round Interference Fit Tube and Lid suitable for storing tablets etc.
Extra parts: 1x PC4-M6 tube connector 2x DIN 562 M3 square nut 2x DIN 912 M3x8 screw a bit of silicone caulk Notes: Use 6.5 mm drill bit for the center hole and 3.5 mm drill bit for the other two holes. Overfill the pocket around the…
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
3D-Printed Grid for Nanlite PavoTube II Upgrade your Nanlite PavoTube II with this custom-designed 3D-printed grid, perfect for shaping and directing your light with greater precision. The grid snaps easily onto the PavoTube II via clips,…
This is a lid grabbing tool to fit Thermo Scientific Matrix 2D Barcoded Open-Top Storage Tubes. It has a hole to add a pen ink insert so that the user can quickly write / mark off samples while using without putting the tool down.
This Print is solves the Problem ov Stacking Thommy Tubes in a Drawer. While some of them do stand pretty well on a shelf, everytime the drawer is closed, they fall over. This relativly simple print helps the tubes keep standing when the…
Eppendorf tube holders for various sizes made for Lab-on-a-Chip and Microfluidics team of Tallinn University of Technology. If you use it for work, kindly refer to us :) You'll find this and more in our Github repos:…
Fixed PTFE tube adapter for Polydryer. The tube is locked firmly and doesn't swing back and forth inside the box during prints. Requires two o-rings with 16mm (ext)/13mm (int) diameter.
I've created a few filament markers for my dry-box. They fit a PTFE tube. Now I know the filament color and type in the dry-box. I got the best prints when printed with the text side down. I've used a 0.6 nozzle with 0.3m quality. For…
EN: As with the newer model with slimmed-down telescopic connecting tubes, the older and bulkier version, which can, however, be moved sideways, also caused the carrier parts to fold away sideways when inserting the cardboard / paper. As…
The ghost might enhance interest in brushing teeth by the younger Set. The tree support was reasonably easy to remove.
The kids might greatly enjoy having this self-propelled boat in the bath. They will learn how the angled blades push the boat (or pull it backward if the rubber band is twisted the wrong way.) It employs a twisted 12-16" rubber band to…
Erleichtert die Reparatur von Radios und das lästige Umdrehen. Scheiben und Füße "müssen" in TPU gedruckt werden, alles andere in PETG. Mit Scheiben aus PETG, PLA usw lassen sich die Arme mangels Friktion auch mit Gewalt nicht festklemmen…
This is a compact drying stand for a ResMed AirFit P10 for AirMini mask tube. Use two of them attached to each other (see model pictures) to prop up the end of the mask tube and let it drip dry. A design feature is that the two pieces…
For your classroom or research laboratory! A Martian Geology holder stand for large test tubes. Great for rock and sediment samples. Supports should not be needed. Print two of the side support pieces (joiner), one of the upper and one of…
The more I used the Mini photo studio screen holder, the more I was bothered by the fact that, although it was very stable, the side sections tended to tip on their side or release the paper, especially with thinner paper/cardboard. I…
This is a mod for MandicReally's design. I needed to run a 3K spool and used his original setup. I found that since my enclosures are kinda high, feeding the filament into the bowden tube was kinda a difficult due to my short arms. This…
These braces are designed to mount a Blazecut T050E suppression tube to the inside top of a Prusabox enclosure using magnets. There are files for 8x4mm and 8x3mm magnets. The magnets are a snug press fit. No glue should be needed, but…
Last minute entry for the Tessellating tiles design contest. Based on my earlier CubeCross design. This model doesn't have plugs to keep the halves together, but it uses caps at each face instead. Print both body halves and 6 caps and…
Many divers experience difficulties to equalize and suffer from a constricted eustachian tube or clogged. Reeducation of the tube can be easily done with the combinaison of a party balloon mounted on the spherical part and while following…
A very basic transportation tube for sds drills, so the lube stays on the drill and do not touch everything. It must be printed in “Spriral Vase”-mode, and the dimensions are adopted for my 0,4mm nozzle. However if you need some other…
The include project is for 41mm bottle cap diameters and 13mm tube diameter. The provided Freecad sourse file can be modified for other diameters. Print settings: ZERO top layers 0.3 layer height 3 perimeters
EN: Extendable telescopic stabilizing rod/tube/pipe for the "mini photo studio screen holder", print-in-place Redesign The "mini photo studio" with my Remix: https://www.printables.com/de/model/764195-mini-photo-studio-screen-holder-remix…
3D printable toilet paper tubes
