Transportation Tube For SDS Drillbits
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: TransportationTube_For_SDS_Drillbits-InnerTube_0.4n_0.2mm_PLA_MINI_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 13.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Transportation Tube For SDS Drillbits, so they can be transported without the lube touching everything...
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A very basic transportation tube for sds drills, so the lube stays on the drill and do not touch everything.
It must be printed in “Spriral Vase”-mode, and the dimensions are adopted for my 0,4mm nozzle.
However if you need some other dimensions the FreeCAD modell is included and all dimensions are handled in the spreadsheet so modifications should be easy.
Please note that the inner diameter for the tube is slightly bigger by po