184 models
Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…
Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…
Slightly thicker with more zip-tie locations and top screw access holes.
Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…
UPDATE May25-2023: Added additional files for printing main canister portion on smaller printers. Split canister sections also have 3mm holes to help with alignment during assembly. This is a full sized printable model of an M829A1. The…
UPDATE: Redesigned the shells. It takes much less time to print and has less weight. not print in place, seperate them before printing DO NOT SHOOT AT PEOPLE there's a 2mm steel tip version, U can put a diameter 2mm nail in it It can…
Different brands of SDS drill bits can have some slight variations in diameter so I remixed Jevermeister's model to accomodate 6x3 mm magnets. I mounted the holders in the L-Boxx using M3 heat inserts. In my L-Boxx the holes don't all…
This allows you to mount SDS Plus drill bits on the lid of your L-Boxx. Tested on a Bosch L-Boxx 136 G4 but it should also fit the older ones. Depending on how well your printer is able to print edges, you may have to force in a drill bit…
Description This design was inspired by Szmalus' excellent design: https://www.thingiverse.com/thing:3850735 However, it didnt feature a fan mount and the SSDs were needed as a structural element of the case. Since I often need to swap…
Wiki Link: https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS) Add a filament change about there for the 2-color look.
SDS-PAGE combs, ranging from 3 to 16 wells, are designed for use with Bio-Rad electrophoresis systems. Each comb is tailored to support different sample volumes and separation requirements. Compatible with systems listed on Bio-Rad's…
I used the openscad from benjamenjohnson to create this. print them as they are, you dont need to turn them. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Inland PETG RED…
I used PLA for printing. Layer height 0.3mm, 2 perimeters and 1.5mm shell thickness. Infill 5% Gyroid. My PLA prints overhangs poorly, so I speed down them to 20mm/s
The Nederlandse Spoorwegen commissioned one 4 axle depressed well car in 1962, type Sds #90200. This one was very similar to the Uaiks721 deployed by the Deutsche Bundesbahn.…
Bought a kit with 12 SDS drills for my impact driver and I wanted to store them neatly in the same case as the driver. Therefore, I made a simple and compact holder that is easy to print, even without using supports. The holder uses a 7…
SDS-Plus Bohrerhalterung für L-Boxx Kisten z.B. Bosch. Halter so drucken, das die SDS Aufnahmen nach oben zeigen. Als Material PETG, ASA, ABS, TPU Wandstärke mindestens 5* 0,2 Struktur für mehr Halt, da die Langen bis zu 400mm SDS-Bohrer…
Sturdy wall mount for the Dewalt DCH273B SDS Rotary Hammer Drill. Built in spacer. Use the spacer to level and install 2 screws. Easy to print. Also is said to work with Makita Hammer Drill DHR171
This is a motor controller mount designed by FRC 4272 to cleanly wire the Mk4i swerve module from SDS . The design requires the SPARK MAX Mounting Bracket . It also requires the following hardware: 5 - 10-32x.5" bolts, 1 - 10-32X1.75 bolt…
Please print with 6 wall loops, don't be shy with plastic, this is a case, it needs to be strong. Print it like on the last picture, this is the best way. Supports are very easy to remove, don't be afraid using them. I didn't found the…
Also on Makerworld!: https://makerworld.com/en/models/2347089-68mm-apfsds-round-functional UPDATE: Added a short petal variant, should save some material and added a 250mm version for 256^3 size printers, should've done that way sooner,…
Republished from my thingiverse: https://www.thingiverse.com/thing:3342804 Links to the parts contain Banggood's affilate metadata. Intro I needed a PM2.5/PM10 sensor during this winter season. I wanted to monitor more than one room and…
You can print in multiple colours to be the most realistic. Supports are also useful for the top curve.
Remixed to fit the older SDSSDE60 version
A couple of gridfinity boxes I designed to hold 1-10mm wood and metal drill bits, as well six SDS+ bits. I store these on a tray on my honeycomb storage wall.
4-fach-SDS-Plus Bohrerhalterung für L-Boxx SDS-Plus Bohrerhalterung für L-Boxx Kisten z.B. Bosch. Halter so drucken, das die SDS Aufnahmen nach oben zeigen. Als Material PETG, ASA, ABS, TPU Wandstärke mindestens 5* 0,2 Struktur für mehr…
This is a complete redesign of this great concept with a added exposed port for the cable and a slight fit change.
I adjusted Jevermeister's drill bit holder for mounting pattern in older style L-Boxx lids. It does fit the new G4 version as well, but not as universal as the original design. Fits 5 SDS Plus dill bits per holder. 2 holders can be…
Caddy for 2 SSDs in one HDD tray with honeycomb pattern for better cooling Added V2 with more features Connector cut out Small stops for SSDs Added FAST version (Use only if temps are not a problem) Use for faster printing and less…
A simple holder for 10 SDS or SDS Plus bits for a rotary hammer (impact drill/perforator) Features latches and guides so the bits go in the right way and stay in place No additional components required, no assembly, no supports. Prints on…
SDS drill bit holder that fits into a Makita MakPac4 case in a empty battery slot. Print with a TPU filament, 10% infill and 2 shells for the wall. Category: Tool Holders & Boxes
Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.
The thing is pretty basic and my printer says it should take 5 to 6 minutes. Also this is untested, it could explode or damage property. TRY AT YOUR OWN RISK. I will try it in my airguns, and update it with a partially tested or unsafe…
In the 2022 season, Triple Helix mounted REV SPARK MAX motor controllers and a CAN connector board to some 3D printed shields which attach to the side of the MK4 swerve module from Swerve Drive Specialties. This makes the module a…
Hier meine Idee von einem Halter für die Langen SDS Plus Bohrer von Parkside. Montiert werden diese mit je 2x Senkkopfschrauben. Länge Variiert je nach Montageuntergrund. Ich hoffe es Gefällt euch!
Instead of printing this one, use the updated model: The original model remains below in case anyone needs to replace a part for a mount that is already made. Looking for a new 12-bit scope I saw the new Rigols and liked the idea of the…
Primarily for use in FIRST® Robotics Competition robots that use the Swerve Drive Specialities MK4 Swerve Module , this is an integrated motor controller and CAN bus connecter mount. Designed for FRC team 5881, the Tech Valley High School…
The DeckBro is a Steam Deck accessory that makes it easy and portable for hard drives to be connected. It’s got two storage compartments: one for any hard drive of the 2.5-inch form factor or less, and one for a USB-C hub. They’re…
Stand to hold a Uniden SDS100 Scanner upright, tilted back 15 degrees to aid in reading the display.
Provides support to each corner of the bumper.
obal na SDS vrtáky
A Reloadable magfed-enabled version of the original by MZ72. PLEASE DO NOT FIRE AT ANYONE 1 shell 12.5mm 1 full print sabot (didn't test much, tell me how it goes) 1 alternate sabot fins (toothpick, or whatever else is that diameter)…
ABS/ASA 100% Infill Print in standing up position
This drill bit case is inspired by the hexagonal drill bit set from Hilti. I liked the design but already had a few drill bits so I didn't want to buy a whole new set for the case. So I made a similar design :) This case is quite simple,…
This is a simple drop in 20mm ball mount for the Uniden SDS100 Scanner. I needed something to use with the 20mm Bulletpoint Mounting Solutions system. This mount can be left in the vehicle while the device itself can be pulled in and out…
A cheap and effective method for taking photos of Coomassie/silver-stained SDS-PAGE gels is to use a light box and a cardboard box with a hole cut out from the bottom. It's like a home-made gel doc just for Coomassie/silver-stained gels.…
This is a magazine for SDS drills with attachment to the wall or to the trunk. Printed from PETG, 15% filling. Toto je zásobník na SDS vrtáky s uchytením na stenu, alebo do kufra. Tlačené z PETG, 15% výplň.
Requires use of the Spline XS 3D print adapter WCP-1021 from WCProducts.com Highly recommend printing with filaments that support mechanical resistance. PETG at a minimum, PA11 Nylon preferred
Resized to work with SDSSDE60 version of the drive.
I made a quick remix from Bevcan clever thing to fit 2 SSDs into a 3.5 inches bay. With 20% infill, 3 walls (0.4 nozzle) and 10% of support density it spends just 30g of filament. Print Settings Printer Brand: Creality Printer: Ender 5…
I purchased the PM10 & PM2.5 sensor sds011. As many have done I added the temperature and humidity sensor. everything managed by an Arduino esp32 and Matt, sending data to my DB influx and graphing everything with Grafana. Of course with…
Enclosure for SDS011 air quality sensor connected to Seed Studio XIAO ESP32C3. Together they make very nice indoor air quality sensor. Requrired hardware: M3 heat inserts 3mm height for ESP32C3 holder Anything < 10mm for the rest. M3x5…
sorry but you have to use supports, just juse organic supports. The Toleranzes are perfekt for printing on an XL whit .6 Nozzle.
(This is the thicker Dual SSD version of my Book Case. I have also published a slimmer Single SSD version.) I wanted a good case for traveling and taking my Plex Media Server with me. My requirements for this case: All Ports on One Side 2…
all parts printed in PLA with 0,15mm Layerhigh.
This bracket allows you to mount 4x SSDs to a single 120mm fan slot. It is designed to use the standard 120mm fan screws to mount it. Useful for when you have more SATA ports than hard drive slots in your case. NOTE: There is an argument…
Wenn man am Auto,am Schaltschrank,an einer Anlage arbeitet und keinen Tisch oder ne Ablagefläche hat ,dann ist man damit gut bedient ! Mit dem richtigen Stativ kann man die Höhe und Neigung einstellen und jederzeit leicht drehen , Die…
Print 2 grippers, body with supports for the nut holes. 3 perimeters but infill can be light. Hardware: 10 M3 nuts and bolts 17-40 mm long. Longer than 25 mm will interfere with the power cord so only 9 can be installed. Also comes with a…
The box is based on Parametric Box v2 (single clasp)
This mount is intended to be attach to the MK4/MK3 (top motor mounted swerve from SDS) after the drive unit is fully assembled. This will provide locations for 2 zip ties for each motor controller, 2 zip tie locations for wire management,…
Supported brands: Rexid Wezid Europ Shank shape: 10,2x36 mm (S.76)
This adapter is meant for SPS30 particular matter sensor. It allow to use it with SDS011 mount holes. Of course - device has to support SPS30 since it has different protocol than SDS011. First version - it will require modifications.…
I wanted to protect my equipment from bumps in transit, or dust while not in use. I designed this to print in one pass on the bed of a Bambu Labs X1/P1, and that mean many others as well. Choose which side the device model labeling is on:…
A box for SDS011 laser dust particles concentration sensor. To be mounted on ceiling (under the roof
Mounts along the inside/long edge of the swerve module. Uses zip ties around the metal of the module to secure it in place, wires can be also be included to route them.
BUILD SEASON 3D Print replacement for SDS MK4n L2+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter. 2024-01-08 UPDATE: Denbot MK4N L2+ 26T 52T 20DP Double Gear bearing clearance updated after finding the wrong value…
When you use the retractable feet to tilt the instrument, the oscilloscope tends to slip or the feet collapse. With this model, you have the same angle as with the retractable feet, while the entire instrument is stable. You can also…
I was struggling finding an appropriate spot near my couch for my portable scanner. I designed this up in fusion for the radio and other storage for a can. Could probably scale up 1% for a little more room as the fitment with the radio is…
Gridfinity bin for 2 Samsung T5 SSDs
There are two version available. I use the snug version as I don't take my drive often, but if you do, try the loose version first.
3D print this Sheath, and with the help of a lock, you can prevent people from using/reading the data inside your Sandisk external SSD. I wouldnt actually recomend this for real security, it was made as a joke, so that you can give to the…
Note: This model may contain floating regions that need to be fixed. Source: https://www.sarna.net/wiki/Drake_SDS_Control_Station
This is a side cover that I designed for my robotics team, FRC 2067, that has bolt holes and cutout for the SDS MK4I.
The SSDs are held well by friction but you can also add a strap or rubber band to secure them.
If you're looking for a mounting option for your SanDisk Extreme Portable SSD (SDSSDE61-xT00), this might be what you're looking for! Intended for use with a standard 1/4" x 1/2" wood screw (about 6.3mm x 12.4mm) you can get at any…
I have some long bits that not fit in case, so i'm need something to organize it in workshop. Print from PETG work good, no supports needed (with good cooling). Put insert into main part, then tеighten the nut, then tеighten the hat. All…
I loved the idea of David Kingsman's design, but wanted to hone it a bit. Changes: Narrowed exterior yellow band to better match actual ASDS Fixed the “X” to better match actual ASDA Added the “Of Course I Still Love You” text Added…
Part of my overhaul of the luftdaten.info - outdoor sensor. I moved the dust particle sensor Nova SDS011 from it's former 'airRohr' housing (a huge, ugly PVC tube) to a standard 85x85 IP65 . Tight fit but works. Now, sitting on the window…
Requires use of the Spline XS 3D print adapter WCP-1021 from WCProducts.com Highly recommend printing with filaments that support mechanical resistance. PETG at a minimum, PA11 Nylon preferred
Hangers are designed for Milwaukee Concrete Core Drilling for SDS and Milwaukee Diamond Max TCT. Diameters are 11.8mm and 13.7mm, 3 additional hangers are for hex drill, and round guiding drills.
The model suffers from some floating volumes that need to be removed (basically, the space ship was drawn next to the station, so it ended up in the generated model)
Use the cutter to cut up an mxl dart, then glue the 3 sections onto 3 sabot petals. Place the petals around the core, and put it into a 30mm barrel. Highly recommend using a Jericho or Raider as this needs tons of air volume and pressure.…
Remixed case with more space for cable.
Housing for popular particulate sensor SDS011. For mounting you need 5 M3 brass inserts. There is enough room for included USB converter. On the sides are openings for intake air and exhaust with slide in options for mesh to prevent…
My oscilloscope is on a slippery surface and I have to hold it every time I press a button. So I designed a very simple mount that can be stuck to the workbench with double-sided tape. Insert the feet of the oscilloscope into the mount…
added print-in 10-32 nuts
A stand for the Siglent SDS 1104X-E so you can mount it on top of the siglent SPD3303X-E power supply. does also fit for other models like the Siglent SDS1202X-E. designed in Fusion 360
BUILD SEASON 3D Print replacement for SDS MK4n L3+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter
If you like this model and use it please upload a like, it really helps others find it! I hated having my scope on my desk and the cables getting in my way, especially when not in use, and I already had a “portable” touch screen mounted…
A very basic transportation tube for sds drills, so the lube stays on the drill and do not touch everything. It must be printed in “Spriral Vase”-mode, and the dimensions are adopted for my 0,4mm nozzle. However if you need some other…
This model extends your legal frame perimeter by ¼", allowing for placement of plates and other parts on the side of your drivetrain tube. Designed to mount onto the SDS MK4i or MK4n modules, this modules uses two 10-32 heat set inserts…
An untested version that has been requested.. A re-design of quick change TPU treads specifically for the SDS MK4i. These are a ground up re-design of the Quick Change Formlabs WCP treads : The MK4i version has geometry adjustments to…
Drill bit organizer printed in one piece with PETG.
This is a very simple mount allowing you to attach 2 of the CTR-Electronics CAN bus connector blocks to a Swerve Drive Specialties MK4i module . This allows you to easily connect the CAN wiring for the CANCoder, and the two falcons to the…
Over a year ago I uploaded SDS8xx VESA mount and it works fine, but I learned a bit from it. It took too long to print because it needed a lot of supports. It was too big because it tried to enclose the whole oscilloscope, so it didn't…
BUILD SEASON 3D Print EXPERIMENT for SDS MK4n L4+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter
In Mai 2022, my Luftdaten.info (https://luftdaten.info/) sensor apparently died. It can be quite a task to order a new SDS011 sensor from China. Plenty of good relosutions for 2024, I decided to look into the problem and realised some…
This is a simple base plate to mount a The Things Uno ( The Things Uno @ element14 ) besides a Nova dust sensor SDS011. With both components it is possible to bring the dust sensor into your LoRaWAN network (e.g. The Things Network) and…
I found this cool cover for a SDS2104X , but it doesn't fit my model (and no CAD model provided). So here's a from-scratch design. I prefer PETG. Add supports under the four pegs so that they are clean enough for mating the two halves…
