1 / 10
Modular Raspberry PI NAS Case for 2.5 inch SSDs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another lightweight, small form factor and open NAS case for the Raspberry Pi supporting dual 2.5 inch SSDs
- Rating
- 5 / 5
- Likes
- 156
- Downloads
- 766
- Makes
- 1
- Views
- 11,622
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Description
This design was inspired by Szmalus' excellent design:
https://www.thingiverse.com/thing:3850735
However, it didnt feature a fan mount and the SSDs were needed as a structural element of the case. Since I often need to swap SSDs and need a place to mount my fan, I designed a new case.
Features
- Slim: The rack is only 4mm wider than a 2.5" SSD and as long as a 2.5" SSD
- Modular: 2-bay and 4-bay version available, each with or without fan mount
- Accessible: All Raspberry Pi ports/pins are accessible without the fan
- Ease-Of-Use: Small nobs secure the SSDs without screws for quick swapping
Compatibile with:
- Raspberry PI 1B+/2B/3B/3B+/4B
- 2.5 inch SSDs (7mm height)
Note: The spacing between the two SSDs is 5mm. Make sure you are not using thick SATA to USB adapters!
Assembly, printing and sourcing details can be found on github
https://github.com/lspr98/raspberrypi-nas