Modular Raspberry PI NAS Case for 2.5 inch SSDs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another lightweight, small form factor and open NAS case for the Raspberry Pi supporting dual 2.5 inch SSDs
- Ocena
- 5 / 5
- Polubienia
- 155
- Pobrania
- 761
- Wydruki
- 1
- Wyświetlenia
- 11 572
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This design was inspired by Szmalus' excellent design:
https://www.thingiverse.com/thing:3850735
However, it didnt feature a fan mount and the SSDs were needed as a structural element of the case. Since I often need to swap SSDs and need a place to mount my fan, I designed a new case.
Features
- Slim: The rack is only 4mm wider than a 2.5" SSD and as long as a 2.5" SSD
- Modular: 2-bay and 4-bay version available, each with or without fan mount
- Accessible: All Raspberry Pi ports/pins are accessible without the fan
- Ease-Of-Use: Small nobs secure the SSDs without screws for quick swapping
Compatibile with:
- Raspberry PI 1B+/2B/3B/3B+/4B
- 2.5 inch SSDs (7mm height)
Note: The spacing between the two SSDs is 5mm. Make sure you are not using thick SATA to USB adapters!
Assembly, printing and sourcing details can be found on github
https://github.com/lspr98/raspberrypi-nas