1 / 1
SDS MK4i CAN block mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small mount for 2 CTRE CAN connector blocks for a SDS MK4i
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a very simple mount allowing you to attach 2 of the CTR-Electronics CAN bus connector blocks to a Swerve Drive Specialties MK4i module. This allows you to easily connect the CAN wiring for the CANCoder, and the two falcons to the main robot CAN bus.
Print settings
| Supports | Adhesion | Layer height | Material |
| No | No | Any | PLA (pictured), or other material |
Installation:
- Remove the bolts securing the metal top cover over the CANCoder
- Remove the two standoffs as shown in the image.
- Mount the connector blocks to the part with M3*6mm bolts
- Slide the mount in where the standoffs were
- Re-insert and fasten the bolts