6j1 Tube Preamp Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for 6J1 tube preamp.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can find it here: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1311.R1.TR1.TRC0.A0.H0.X6j1+tube+preamp.TRS0&_nkw=6j1+tube+preamp&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=tube+preamp
You can find this popular Chinese preamp just about anywhere.
I made a housing for it so that it can stand nicely on the cupboard.
The tubes and electronics do not become so warm, so PLA can be used.
Use screws diameter 3mm with a length of 10mm to a maximum of 13mm.
It is not necessary to attach the PCB with screws, but if you want you can screw it onto a wooden board. The housing is therefore also screwed in this way.
The button consists of 2 parts.
You have an inner part that spans around the axis of the potentiometer.
Then apply the button to this.
If necessary, use some CE glue.