6j1 Tube Preamp Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for 6J1 tube preamp.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 93
- Makes
- 0
- Views
- 646
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can find it here: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1311.R1.TR1.TRC0.A0.H0.X6j1+tube+preamp.TRS0&_nkw=6j1+tube+preamp&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=tube+preamp
You can find this popular Chinese preamp just about anywhere.
I made a housing for it so that it can stand nicely on the cupboard.
The tubes and electronics do not become so warm, so PLA can be used.
Use screws diameter 3mm with a length of 10mm to a maximum of 13mm.
It is not necessary to attach the PCB with screws, but if you want you can screw it onto a wooden board. The housing is therefore also screwed in this way.
The button consists of 2 parts.
You have an inner part that spans around the axis of the potentiometer.
Then apply the button to this.
If necessary, use some CE glue.