Tiny 'n tough rope tensioner -Enhanced version!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to use and quick printing, but tough and durable though. Needs only 1.5 g of filament, to wear around 600 N load!
- Ocena
- 5 / 5
- Polubienia
- 213
- Pobrania
- 569
- Wydruki
- 7
- Wyświetlenia
- 1816
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for a slick, quick printing and reliable rope tensioner, to set up my drone gates (Which will be here for download soon!), but I could make out only one design, which I found worth trying. Unfortunately this suffered on heavy notch fatigue and the author allowed no remixing.
So I took the challenge to make the lightest, toughest and most durable tent rope tensioner, I could imagine.
And here we go:
- Tested under harsh Copter-Park conditions!
- Works perfectly with 3mm (1/8 inch) rope or Paracord 425.
- A very handy supplement when camping, hiking or slackening stuff.
Attention: This device is NOT suitable to carry HUMAN LOAD by any means!!
Print settings:
- preferreably print with PETG
- set to “3 perimeters” for extra strength
- 0.2mm layer height
- 15% infill
- no supports