1 / 6
Universal Hook & Eyelet for Tent Poles V1 – Strong Camping Holder for Tarps and Ropes — zdjęcie 1
1 / 6

Universal Hook & Eyelet for Tent Poles V1 – Strong Camping Holder for Tarps and Ropes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self-closing camping hook and eyelet for tent poles Ø22–32 mm. Easy to print, strong and practical.

Ocena
0 / 5
Polubienia
87
Pobrania
282
Wydruki
0
Wyświetlenia
1423
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update Available

A new and improved V2 version of this Tent Pole Hook & Eyelet system is now available.

V2 includes:

  • Improved locking mechanism

  • Redesigned geometry

  • Stronger and cleaner shapes

  • 100% support-free printing

  • Better everyday usability

  • Additional size options

If you are downloading today, I recommend using the new V2 version.

These practical universal hooks and eyelets are perfect for camping, festivals, or any outdoor activity.
They fit securely on tent poles with diameters of 22, 25, 28, and 32 mm – ideal for holding ropes, lights, towels, or tools around your campsite.

🔹 How it works:
Simply open the clip and guide the side without the eyelet or hook around the pole. Then press the parts together – and you're done!
The system is self-closing under load, meaning it cannot open accidentally when something is hanging from it.
To release, make sure there is no load on the hook or eyelet first, then you can open it again easily.

🔹 Printing & Assembly:
Printing is done with supports for the eyelets and hooks.
After printing, the two parts must first be separated carefully using a screwdriver.
Position them as shown in the pictures and apply slight pressure to detach.
Then insert an M3 cylinder head screw (length 20–25 mm) – and your hook or eyelet is ready to use!

🔹 Recommended print settings:

Material: PETG or ASA (for outdoor durability)

Layer height: 0.2 mm

Infill: 25–35 %

Supports: Required only for hook/eyelet area

No other supports necessary

💡 Tip: You can slightly heat or sand the hook to adapt it to different pole sizes if needed.

Use cases:

Hanging lights, towels, or organizers in tents

Holding ropes or tarps in place

Mounting small gear or tools during camping trips

 

Anyone who would like to support me is very welcome to buy me a beer.

 JUST CLICK HERE

Tagi