XTool F1 Ultra 90 Degree Exaust Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for XTool F1 Ultra to replace the straight exaust to an 90 degree exaust
- Ocena
- 3 / 5
- Polubienia
- 42
- Pobrania
- 399
- Wydruki
- 1
- Wyświetlenia
- 1685
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
90 Degree adapter for XTool F1 Ultra to 80mm hose
Hated the straight one so i messured it and gave my best to fit it as good as possible.
I print it right now (~5h) so pics of the done thing come asap
Inside the adapter i used a 1mm plate for stability and removing some air turbulences, but also for the hose so it cant be too far inside the adapter.
PLA
0,2mm layer
Printed in orientation seen in pics
Supports are tree for large overhang sections
As usual i give the step file too for further modifications
Hope this helps u
EDIT: Printed it and the thread was 1mm to narrow for the hose. I edited both files, so the hose should fit now. On the Machine side it fits perfectly. Also i changed print orientation.