Mikrotik hEX PoE (RB960PGS) Rack Mount Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A module for the DAP 2U Rack Mount Panel to mount your Mikrotik hEX PoE into your rack.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
To mount the Mikrotik hEX PoE in my homelab server rack I designed this module for the DAP 2U Rack Mount Panel.
It was a bit difficult to find a good way to mount the device securely so that it wouldn't slide forth or back. I came up with the solution of putting two square nuts into the holes of the wall mount and securing everything with two screws. It's a bit fiddly to get the nuts where they need to be and not to fall into the hEX PoE, but with a small screwdriver or Allen key it's doable.
Printing instructions
I recommend printing this module in PETG or another filament with good layer adhesion. No supports required.
Non-printed parts
- 2x M3x5mm Screws or 6mm and a few washers
- 2x M3 square nuts (hex nuts don't fit into the hEX PoE wall mount holes)