Mikrotik hEX PoE (RB960PGS) Rack Mount Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A module for the DAP 2U Rack Mount Panel to mount your Mikrotik hEX PoE into your rack.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 40
- Makes
- 0
- Views
- 530
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
To mount the Mikrotik hEX PoE in my homelab server rack I designed this module for the DAP 2U Rack Mount Panel.
It was a bit difficult to find a good way to mount the device securely so that it wouldn't slide forth or back. I came up with the solution of putting two square nuts into the holes of the wall mount and securing everything with two screws. It's a bit fiddly to get the nuts where they need to be and not to fall into the hEX PoE, but with a small screwdriver or Allen key it's doable.
Printing instructions
I recommend printing this module in PETG or another filament with good layer adhesion. No supports required.
Non-printed parts
- 2x M3x5mm Screws or 6mm and a few washers
- 2x M3 square nuts (hex nuts don't fit into the hEX PoE wall mount holes)