1 / 5
Mikrotik hEX PoE + Banana Pi BPI-R4 Rack Mount Module — zdjęcie 1
1 / 5

Mikrotik hEX PoE + Banana Pi BPI-R4 Rack Mount Module

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A module for the DAP 2U Rack Mount Panel to mount your Mikrotik hEX PoE and Banana Pi BPI-R4 into your rack.

Ocena
0 / 5
Polubienia
1
Pobrania
27
Wydruki
0
Wyświetlenia
969
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

This is a remix of my two separate Rack Mount Modules: Mikrotik hEX PoE (RB960PGS) and Banana Pi BPI-R4 for the DAP 2U Rack Mount Panel. Both devices don't need 2U height, so i merged them together.

Install the Mikrotik hEX PoE first. For details on mounting the individual devices, please refer to the respective project pages.

Printing instructions

I recommend printing this module in PETG or another filament with good layer adhesion. No supports required.

Non-printed parts

  • 2x M3x5mm Screws or 6mm and a few washers
  • 2x M3 square nuts (hex nuts don't fit into the hEX PoE wall mount holes)
  • 4x M3x10mm Screws
  • 4x M3 hex nuts

 

Tagi