1 / 5
Mikrotik hEX PoE + Banana Pi BPI-R4 Rack Mount Module
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A module for the DAP 2U Rack Mount Panel to mount your Mikrotik hEX PoE and Banana Pi BPI-R4 into your rack.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 969
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a remix of my two separate Rack Mount Modules: Mikrotik hEX PoE (RB960PGS) and Banana Pi BPI-R4 for the DAP 2U Rack Mount Panel. Both devices don't need 2U height, so i merged them together.
Install the Mikrotik hEX PoE first. For details on mounting the individual devices, please refer to the respective project pages.
Printing instructions
I recommend printing this module in PETG or another filament with good layer adhesion. No supports required.
Non-printed parts
- 2x M3x5mm Screws or 6mm and a few washers
- 2x M3 square nuts (hex nuts don't fit into the hEX PoE wall mount holes)
- 4x M3x10mm Screws
- 4x M3 hex nuts