1 / 3
Prusa XL Tighter Gap Frontcap Cover for Prusa XL enclosure — zdjęcie 1
1 / 3

Prusa XL Tighter Gap Frontcap Cover for Prusa XL enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It make the holes on the side small

Ocena
5 / 5
Polubienia
29
Pobrania
88
Wydruki
1
Wyświetlenia
1012
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Modified front caps for the Prusa XL that reduce the gap when the Prusa Xl enclosure is attached. 

Model may be needed to resized based on your machine, as my gap was less than 1 mm. 

Tagi