Notos air tube grip with bottom pic mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was my first handguard I designed and used on my Umarex Notos
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 317
- Wydruki
- 1
- Wyświetlenia
- 1957
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Thanks for stopping in and checking out my 3D prints, this one I designed and used on my Notos for a while, I since then have made several different styles of hand guards with different mounts. I wanted to share this one with you to help take your shooting experience to the next level.
things you will need
1. Print STL file, print as shown upright and use a brim, no need for supports
2. You will need 3 M3x10mm Allen bolts
3. M3 brass insert 3pcs. (these need to be set into handguard, side with holes that do not pass through)
4. You can check out my channel on YouTube at redcornoutdoors
if you need to see how to assemble.
5. please share picture and feed back
6. Follow if you want to see more