1 / 3
Strobe Flasher Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For wherever you need to flash yourself in the face
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This model is a vertical mount for the common 6 LED strobe flashers sold all over Amazon (this is the exact one I used).
There are two versions of this design: One that holds a single strobe, and another that holds a strobe and a 4x12 LED matrix. The matrix just friction fits into slots on the mount. No glue needed.
The original intent of this design was to mount strobes on top of a virtual pinball backbox, but I'm sure there are plenty of other uses as well.
BOM (per mount)
- (1) 4x12 matrix (optional)
- (1) 6 LED strobe
- (2) M3 x 6mm socket head screws
- (2) 3x4.5x5mm heat sets (3x4x5 will work too)
- (2) #6 wood screws