1 / 3
Strobe Flasher Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For wherever you need to flash yourself in the face
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This model is a vertical mount for the common 6 LED strobe flashers sold all over Amazon (this is the exact one I used).
There are two versions of this design: One that holds a single strobe, and another that holds a strobe and a 4x12 LED matrix. The matrix just friction fits into slots on the mount. No glue needed.
The original intent of this design was to mount strobes on top of a virtual pinball backbox, but I'm sure there are plenty of other uses as well.
BOM (per mount)
- (1) 4x12 matrix (optional)
- (1) 6 LED strobe
- (2) M3 x 6mm socket head screws
- (2) 3x4.5x5mm heat sets (3x4x5 will work too)
- (2) #6 wood screws