Hot shoe / flash shoe mount for cameras with tilt-down-screens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For everyone who has one of these "blogger/vlogger"-cameras, which features a cool flipdownscreen, which... is in the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For everyone who has one of these "blogger/vlogger"-cameras, which features a cool flipdownscreen, which... is in the way if you want to use a tripod.
Here on thingiverse is already a design that does exactly that, but there is the thread printed into that, and i dont trust printed threads for my ~500€ camera.
So i rather made a new one, (well, mixed out of two designs) in which you simply glue a 1/4 nut and youre set.
I hope.
Edit: in the photo on the tripod you see an abomination of the tripod-plate, but thats because i glued for a test an M6-Nut in there, as i had not the correct nut lying around.
Disclaimer: dont kill me if your camera falls down due to using this adapter.
You print and use this at your own risk.
Print instructions
Category: Camera Print Settings
Printer: Anet A8
Rafts: No
Supports: No
Resolution: 0.2
Infill: 50%
Filament: Owl Filament PLA White
Notes:
Its made so you dont need any supports. Just print that right away.
Printing time is around 30mins @0.2mm layer height.
Also i would print this a tad hotter (+5°C maybe?), so the layers really bond well.