Garden Windmill - V2! - Now self-orienting! - 100% Printable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printable, easy to assemble windmill for your garden. Now self-orienting!
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 218
- Wydruki
- 2
- Wyświetlenia
- 1191
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Fully printable, easy to assemble windmill for your garden.
V2 released!
I added a simple mechanism to make it follow the direction of the wind, made the tolerances a bit looser and some other minor changes.
You can use a 608 bearing for the propeller, but you can also 3d print it. I used this model: https://www.printables.com/model/410574
The size is small enough to fit on almost any 3d printer (biggest part is 130mm wide).
It uses a 3d printed peg to secure into the ground.
All parts are designed to be held in by friction.
Propeller:
- 3 walls
- 5% infill
- no support
Everything else:
- 2 walls
- 15% infill
- no support
Print everything as oriented, use a brim if needed on the body and leg. The tolerances are a bit tight, so let me know if I should change them.