Garden Windmill - V2! - Now self-orienting! - 100% Printable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully printable, easy to assemble windmill for your garden. Now self-orienting!
- Rating
- 5 / 5
- Likes
- 91
- Downloads
- 218
- Makes
- 2
- Views
- 1,193
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Fully printable, easy to assemble windmill for your garden.
V2 released!
I added a simple mechanism to make it follow the direction of the wind, made the tolerances a bit looser and some other minor changes.
You can use a 608 bearing for the propeller, but you can also 3d print it. I used this model: https://www.printables.com/model/410574
The size is small enough to fit on almost any 3d printer (biggest part is 130mm wide).
It uses a 3d printed peg to secure into the ground.
All parts are designed to be held in by friction.
Propeller:
- 3 walls
- 5% infill
- no support
Everything else:
- 2 walls
- 15% infill
- no support
Print everything as oriented, use a brim if needed on the body and leg. The tolerances are a bit tight, so let me know if I should change them.