1 / 4
NF-Sunrise Small Projection Area 5015 Blower Fan Duct + Eddy Probe Mount + SHT36 Mount — zdjęcie 1
1 / 4

NF-Sunrise Small Projection Area 5015 Blower Fan Duct + Eddy Probe Mount + SHT36 Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

5015 Blower Fan Duct + Eddy Current Probe Mount + SHT36 Mount Aimed at Minimizing Projection Area from Above

Ocena
0 / 5
Polubienia
1
Pobrania
29
Wydruki
0
Wyświetlenia
216
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

For the different sizes of 5015 blower fans, I have 3 types of ducts with different opening sizes. If you don't see a suitable opening, please let me know the size.
Example: 200_150 has a 20.0mm x 15.0mm opening.

I designed it with a CHC hotend, so I don't know if it will work with a V6 hotend. I designed it so that it doesn't interfere with the V6 heat block, but there is a possibility that the heater wiring may interfere.

For 5015 Blower
M3x18  x 1
M3 Nut x 1
Note: There is little space on the nut side, so please select the screw length carefully so as not to damage the NF-Sunrise body.

For 4010 Fan
M3x14  x 3

For Eddy probe
M3x6   x 2

For SHT36
M3x45  x 2
M3x14  x 2
M3 Nut x 4
Note: If you are not using full threads, make sure the threads can reach the motor.

CHC Hot End model
https://www.printables.com/model/380026-trianglelabs-chc-hotend

Tagi