1 / 3
Reusable Food Storage / Freezer Bag Holder / Organizer — zdjęcie 1
1 / 3

Reusable Food Storage / Freezer Bag Holder / Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall-mountable holder for reusable food/freezer bags.

Ocena
0 / 5
Polubienia
25
Pobrania
42
Wydruki
0
Wyświetlenia
488
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

This design mounts to a wall/cupboard door to hold reusable food/freezer/fridge bags. The dimensions were based off of these bags but others may work too. The 4 bags of each size fit comfortably.

The front divider is 89mm high and the rear two dividers are 160mm high. The holders can be mounted at any width apart to accommodate different size bags.

The holders can be secured with double sided 3M VHB or similar, or you can use small screws through the included holes. I used 12mm screws

Print with PLA or PETG, 3 walls. Make sure you have enough layers at the bottom for strength. You may need a brim to prevent them coming un-stuck while printing.

The two sides are identical - one is just mirrored.

Tagi